NEC UPD98413 Скачать руководство пользователя страница 89

Страница: 89 / 317

CHAPTER 3 FUNCTIONAL OUTLINE

PRELIMINARY

NEC confidential and Proprietary

3.4.5 Monitoring Signal Label Byte

(1) Path Payload Label Unstable (Path PLU)

The

PD98413 checks whether Signal Label, stored in the C2 byte, is received stably. Each time a frame has

been received, the value of the C2 byte is checked to see if it is the same as the value of the previous frame. If

the value of the C2 byte differs, an internal counter is incremented. When counter has been incremented up to

five, the

PD98413 indicates this status as the Path PLU. The internal counter is reset to zero if a frame having

the same C2 byte is received three or five times (set to the MDPOHR register)

continuously. Then the Path PLU

status also is terminated.

For example, if a C2 byte with one byte lost is received while C2 bytes having the expected value have been

received in succession, the counter is incremented by one when the lost byte is received and is again

incremented by one when the normal byte is next received. As a result, the counter is incremented by two.

The C2R register of the OH drop register stores the value of a C2 byte if the

PD98413 has received the C2 byte

of the same value three or five times (set to the MDPOHR register) continuously.

(2) Signal Label Mismatch

The

PD98413 has a function for checking the received C2 byte and detects the Path Unequipped (Path UNEQ)

and the Path Payload Label Mismatch (Path PLM).

Path UNEQ

Each time a frame has been received, a value of the C2 byte is compared with 00h. If the C2 byte is 00h, the

Path UNEQ is detected. The detection and clearing conditions are as follows.

Detection: If frames with the C2 byte being 00h are received n times continuously

Clearing: If frames with the C2 byte being the value other than 00h are received n times continuously

* n = 3 or 5. This can be selected by using the PPLMM bit of the MDPOHR register. In the default mode, n=5.

When the Path UNEQ is detected, the

PD98413 indicates this error by the interrupt.

If the

PD98413 is detecting LOS, LOF, LOP, L-AIS or P-AIS, the Path UNEQ is not detected.

Path PLM

Each time a frame has been received, a value of the C2 byte is compared with the expected value. If the values

do not coincide, the Path PLM is detected.

- The

PD98413 can be set the expected value by the C2EX[7:0] bits of the MDPOHR register (Default value is

13H) , and it can be select to include in the expected value by the PPLM02 bit of the MDPOHR register.

- Note that the value of 01H is includes in the expected value, but it can be except by setting of the PPLM01 bit

of the MDPOHR register.

The detection and termination conditions are as follows.

Detection: If frames with the C2 byte Not being the expected value are received five times continuously.

Termination: If frames with the C2 byte being the expected value are received five times continuously.

* n = 3 or 5. This can be selected by using the PPLMDT bit of the MDPOHR register. In the default mode, n=5.

The default value of the C2EX field is 13H.

When the Path PLM is detected, the

PD98413 indicates this error by the interrupt.

If the

PD98413 is detecting LOS, LOF, LOP, L-AIS or P-AIS, the Path PLM is not detected.

Содержание UPD98413






























































































































































































































































































































Результаты поиска

Содержание UPD98413

Отзывы:

Похожие инструкции для UPD98413

Бренды по названию

Популярные бренды

NEC UPD98413, Руководство пользователя

Результаты поиска

Содержание UPD98413

Отзывы:

Похожие инструкции для UPD98413

Бренды по названию

Популярные бренды