NEC UNIVERGE WL, Быстрое руководство по установке

Страница: 27 / 34

1-21
UNIVERGE WL Access Point (External-Antenna) Quick Installation Guide
• Slide the screws into the keyhole slots on the mounting bracket as
shown in the following figure.
Figure - Assembling the UNIVERGE WL AP to the Flush-Mount Bracket
• Attach the cables to the sides of the UNIVERGE WL AP.
NOTE
Make sure the side of the UNIVERGE WL AP with the door is facing away
from the wall. This ensures that the correct antenna is facing the building,
and makes future upgrades easier.
NOTE
If the screws do not securely hold the bracket, remove the UNIVERGE WL
AP and adjust the screws until they securely hold the bracket.
NOTE
Make sure the cables are routed away from the UNIVERGE WL AP
antennas.
NOTE
When the UNIVERGE WL AP is powered up and is associated with an
UNIVERGE WL Wireless Controller (Green/Power and Yellow/802.11b/g
and/or Yellow or Amber/802.11a LEDs lit), the UNIVERGE WL AP begins
broadcasting its beacon signal(s). When this happens, complete the
installation as quickly as possible to remove yourself from within 8 inches
(20 cm) of the UNIVERGE WL AP to comply with FCC RF radiation
exposure guidelines.