NEC Univerge SV9300, Руководство пользователя

Страница: 63 / 84

FEATURE OPERATION
63
AUTOMATIC INTERCOM
Automatic Intercom provides a path for voice announcement
calls between two terminals using a Line key. Private
conversations can be held. The Busy/Idle status of the
associated the terminal is displayed on the Automatic Intercom
feature key LED.
The feature key is set by system data setting at
initial installation. For details, please contact the
system administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Press Automatic Intercom feature key.
The called terminal receives a tone burst.
TO ANSWER
1.
While hearing ringing tone,
Automatic Intercom feature key lamp flashes green.
Voice Call alert tone is heard.
2.
Press Automatic Intercom feature key.
Automatic Intercom feature key lamp lights green.
3.
Press Speaker key.
Speaker key lamp lights red.
MANUAL INTERCOM
The Manual Intercom groups have up to six terminals sharing a
common signal path. Users can call other members of the
Manual Intercom group by pressing a Manual Intercom feature
key; each press sends a tone burst over the speakers of all the
terminals in the group. When another user answers the call a
speech path is established.
The feature key is set by system data setting at
initial installation. For details, please contact the
system administrator.
TO INITIATE
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Press Manual Intercom feature key.
You will receive a ringback tone
3.
Each press of Manual Intercom feature key sends
tone bursts.
TO ANSWER
1.
While hearing ringing tone,
Manual Intercom feature key lamp flashes
green.
You may receive a ring tone.
2.
Press Manual Intercom feature key.
Manual Intercom feature key lamp lights green.
3.
Press Speaker key.
Speaker key lamp lights red.
4.
If called terminal is engaged in a non-intercom
call, the terminal may press Manual Intercom
feature key after placing original caller on hold
(with Hold key).