TERMINAL SETUP
44
TO ENABLE/DISABLE BACKLIGHT
The procedure below shows how to enable/disable the backlights
of LCD and digit keys.
The backlights illuminate (for approximately 10 seconds) when
you press any key or lift the handset.
1.
Press Menu key while terminal is in an idle state.
2.
Select
□
3 Settings.
3.
Select
□
3 Back Light.
4.
Select desired setting from the following list.
No.
Menu Item
Meaning
1
Disable
Backlights of LCD and digit keys are
disabled.
2
Enable
Backlights of LCD and digit keys are
enabled.
■Default setting is
□
2 Enable.
■The enabled item is highlighted.
5.
After the selection is completed, press the Enter
key or the OK soft key.
Содержание Univerge SV9300
Страница 9: ...CONTENTS 9 TO LOG OUT 83 HOW TO OPERATE 84...
Страница 12: ...INTRODUCTION 12 FACE LAYOUT DT920 SERIES ITK 6D ITK 12D...
Страница 13: ...INTRODUCTION 13 DT530 SERIES DTK 24D DTK 12D...
