NEC UNIVERGE SV9100 DT930, Руководство пользователя

Страница: 85 / 132

69
1.
Answer a Call
(1) A call is terminated to the telephone whose
terminal number is accommodated to the
Multiline Appearance feature key.
The Call Indicator Lamp flashes.
The Multiline key lamp flashes red.
(2) Press Multiline Appearance feature key.
The Call Indicator Lamp goes off.
The Speaker key lamp lights red.
(3) Lift the handset to start a conversation.
The Speaker key lamp goes off.
DND (Do Not Disturb)
This feature restricts incoming calls to a terminal.
Set DND
(1) Press
↓
.
(2) Press Prog .
(3) Press DND .
(4) Press Set .
(5) Select the DND type.
Cancel DND
(1) Press
↓
.
(2) Press Prog .
(3) Press DND .
(4) Press Cncl .
Save and Repeat a Number
This feature allows a specific dialed number saved to
the telephone and then you can redial that number. .
Set Save and Repeat
(1) Dial the desired number and press Saved
Number Redial ( 30 ) or dial the access code.
Dial using Save and Repeat
(1) Press Speaker key.
You receive a dial tone.
The Speaker key lamp lights red.
(2) Press Saved Number Redial ( 30 ) or dial the
access code.
(3) Lift the handset to start a conversation.
Speaker key lamp goes off.
When you press a Feature key with a call in
progress, the call is disconnected.
This feature is set using a Softkey or Feature
key. The Feature key is set by system data
setting at initial installation.
For details, contact the system administrator.
This feature is set using a Softkey or Feature
key. The Feature key is set by system data
setting at initial installation.
For details, contact the system administrator.
Up to three Save and Repeat feature keys can
be assigned per telephone.