NEC UNIVERGE SL2100, Сетевое руководство

Страница: 176 / 196

3.10 Conference
The user can create a Conference call to include a user in a networked system.
3.11 Department Calling
Department Group access is available via Networking. When the extension at System A tries to make
a Department Call to System B, System A should have a numbering plan which defines the
Department Access code at System-B (must be defined as dial type 8, Networking in Program 11-01:
System Numbering).
The following Department Calling options are supported with the Networking feature.
Program Number Mode Same as Single System
16-01-02 Department Calling Cycle Yes
16-01-03 Department Routing When Busy Yes
16-01-04 Hunting Mode No
16-01-05 All Ring Mode When a call is transferred to a Depart-
ment Group with All Ring, there is a dif-
ference in operation. In a single system,
an extension within the same system
can transfer a call to a Department
Group and the call will ring an extension
within the Department Group once the
transferring user hangs up. In a net-
worked system, the transfer will not go
through and the call will recall the exten-
sion performing the transfer.
16-01-06 STG Withdraw Mode No
16-01-07 Call Recall Restriction for STG No
16-01-08 Maximum Queuing Number No
16-01-10 Enhanced Hunting Mode No
3.12 Department Step Call
After calling a busy Department Calling Group member in a networked system, an extension user can
have Department Step Calling Quickly call another member in the group.
3.13 Direct Inward Dialing (DDI)
An incoming DDI call can be routed to an extension in a networked system.
3.14 Direct Inward Line (DIL)
A Direct Inward Line (DIL) is a trunk that rings an extension, virtual extension or Department Group
directly. Since DILs only ring one extension or group (i.e., the DIL destination), employees always
know which calls are for them. For example, a company operator can have a Direct Inward Line for
International Sales Information. When outside callers dial the DIL’s phone number, the call rings the
operator on the International Sales line key. The DIL does not ring other extensions.
The outside party can call an extension at a networked system, if the DIL trunk is set to route to the
other system.
SL2100 ISSUE 1.0
13-14 AspireNet