NEC UNIVERGE SL2100, Быстрая установка

Страница: 22 / 26

Configure the SL2100
Quick Install Guide
– SL2100 Terminals Type B rev 1.0
22
Default Timer Setting
Description Function Default
Minimum Break Time The minimum duration of a
dial pulse break 2
(10mS)
Maximum Break Time The maximum duration of a
dial pulse break 10
(50mS)
For Time Break Recall detection set this timer
to 13 (65mS).
Do not set this item to less than 13 (65mS)
Minimum Make Time The minimum duration of a
dial pulse make 2
(10mS)
Maximum Make Time The maximum duration of a
dial pulse make 20
(100mS)
Minimum Hook Flash
Time The minimum duration of a
Hook Flash/Time Break
Recall TBR 10
(100mS)
For Time Break Recall detection set this timer
to 14 (70mS).
Maximum Hook Flash
Time The maximum duration of a
Hook Flash/Time Break
Recall TBR 20
(100mS)
For Time Break Recall detection set this timer
to 25 (125mS)
Minimum Ground-flash
Time The minimum duration of a
ground flash 21
(105mS)
Minimum Off-hook Time The minimum time for an
off-hook duration 19
(95mS)
No Detection Time after
Off-hook The duration after off-hook
before dialling will be
accepted 60
(300mS)
No Detection Time after
Pulse Dial Detection The maximum duration
after each pulse 70
(350mS)
Loop Disconnect Time
after Reversal Time The time after line reversal
that a Loop Disconnect is
recognised 60
(600mS)
Ring Message Wait
Period 150
(750mS)
Recommended Timer Setting
Description Setting
Minimum Break Time 2 (10mS)
Maximum Break Time 13 (65mS) For Time Break Recall detection
Minimum Make Time 2 (10mS)
Maximum Make Time 20 (100mS)
Minimum Hook Flash Time
14 (70mS) For Time Break Recall detection
Maximum Hook Flash Time
25 (125mS) For Time Break Recall detection
Minimum Ground-flash Time 21 (105mS)
Minimum Off-hook Time 19 (95mS)
No Detection Time after Off-hook 60 (300mS)
No Detection Time after Pulse Dial Detection 70 (350mS)
Loop Disconnect Time after Reversal Time 60 (600mS)
Ring Message Wait Period
150 (750mS)