manualshive.com logo in svg

NEC UNIVERGE NEAX 2000 IPS, Руководство по управлению, Страница: 745 / 1038

Поделиться
Скачать
NEC UNIVERGE NEAX 2000 IPS Скачать руководство пользователя страница 745

– 721 –

NWA-008844-001 Rev.5.0

91ch3008.fm

COMMAND CODE TITLE:

STATION, TRUNK LINE MAKE BUSY

E5 

NOTE 1:

For a station that is made busy, call termination to the station is restricted, but call origina-
tion is available.
For extension lines on a D

term

, My Line and Multiline make busy can be set individually, with

the same condition as mentioned above.

NOTE 2:

For a trunk that is made busy, the outgoing call is restricted, but on incoming, the call is 
available.

NOTE 3:

For the B channel that is made busy, call termination to the ISDN Terminal corresponds with 
the B channel is restricted, but call origination is available.

NOTE 4:

Make idle of CS/ZT since the CS/ZT is in make busy forcibly when assigning the CS/ZT data 
by CM10/CM14.

NOTE 5:

Under a made busy condition, the Busy Lamp on the card flashes (60 IPM).

CME5

Содержание UNIVERGE NEAX 2000 IPS















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов