FEATURE OPERATION
85
■Depends on the around environment, or
distance with Bluetooth supported
devices, Sound skips (sounds are
interrupted) or noise may occur.
■It is recommended to adjust the
reception volume of the Headset with
the volume button on the Headset side,
and use the default volume on the
terminal side (except Jabra Talk 45).
■ When using the Jabra Talk 45, the
reception volume sounds louder
compared to the handset. Please note
that when switching the audio output
from the handset to the Jabra Talk 45.
■In Voyager5200, a voice announcement
("Answering Call.") is played when an
incoming call is answered. This may
delay the start of the call, so you can
stop the voice announcement with the
Plantronics Hub application. The
Plantronics Hub application may be
downloaded from URL below and
installed on the PC.
URL:
https://www.plantronics.com/us/en/supp
ort/downloads-apps
About radio interference
If radio interference occurred, wireless
connection of the Bluetooth
headset
may be unstable (such as
disconnection, noise in a call, or hang
up a call). For that reason, when there
are the same 2.4GHz radio products
(Wi-Fi access point, other Bluetooth
devices, microwaves, etc.), keep the
distance between the Bluetooth
headset and the other devices 5 meters
or more.
In addition, DTZ-24BT uses a higher
radio wave output method (Class 1:
100mW) than general Bluetooth
headsets. The closer the Bluetooth
headset and the DTZ-24BT, the
wireless connection of the Bluetooth
headset may be unstable (such as
disconnection, noise in a call, or hang
up a call) because of the radio
interference.
Both of them are used while moving,
the effects of radio interference is
unavoidable even if the installation
distance is limited. Please make sure
not mix Bluetooth
headset and DTZ-
24BT on the same floor.
How to switch enable/disable the voice
announcement in the available
Bluetooth
headset made by Jabra,
please refer to the web site of each
product.
