manualshive.com logo in svg

NEC TalkTime Max 962, Руководство пользователя

Поделиться
Скачать
NEC TalkTime Max 962 Скачать руководство пользователя страница 44

CARE AND MAINTENANCE

Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you enjoy this product for many years.

Keep it dry. (Water contains minerals that will corrode electronic circuits). Avoid all
liquid spills. Any form of liquid will cause permanent damage to your phone.

Do not store in hot area. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.

Do not drop it. This might cause permanent damage. The internal circuit boards
can be broken.

Do not use or store in dusty, dirty areas. This will cause permanent damage to
moving parts.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. If
the unit is not working properly, take it to your nearest authorized dealer. The
personnel there will assist you, and, if necessary, arrange for service.

TROUBLESHOOTING

If the power does not come on or stay on:

Make sure the battery is installed in the phone properly.

Be sure the contacts are clean on the battery and the charger.

Battery charge may be too low for operation. Listen for the low battery alarm or
check battery level by pressing FCN.

If the power comes on, but the phone does not work:

Check the NO Service (NO SVC) message, you might be out of the cellular
service area.

Make sure that the antenna is extended to its full length.

  LIMITED WARRANTY

1. What Products May Be Covered By This Limited Warranty?
The following products (the "Products" or the "Product") purchased through an
NEC America, Inc. (NECAM), Wireless Communications Division Authorized
Dealer (the "Dealer") in the United States on or after January 1, 1997, may be
covered by this warranty:

[TALKTIME MAX962 ANALOG CELLULAR TELEPHONE]

2. What Does This Warranty Cover?
NECAM warrants to the original end-user Product purchaser ("You") that the
Products will conform to the applicable published specifications in effect at the
time of shipment from NECAM to the Dealer, and that the Products will be free
from defects in materials or workmanship under normal use and service during
the warranty period described in Paragraph 4.

-39-

Содержание TalkTime Max 962




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды