manualshive.com logo in svg

NEC TalkTime Max 962, Руководство пользователя

Поделиться
Скачать
NEC TalkTime Max 962 Скачать руководство пользователя страница 2

ATTENTION

Before Using the Phone:

It is necessary that you CHARGE your phone battery fully before attempt-
ing to make or receive a call.

Battery Disposal:

DO NOT PLACE USED BATTERIES IN YOUR REGULAR
TRASH.THIS NICKEL-CADMIUM (Ni-Cd) BATTERY MUST
BE COLLECTED, RECYCLED OR DISPOSED OF IN AN
ENVIRONMENTALLY SOUND MANNER.

Battery Recommendations:
The NEC TalkTime 900 Series cellular phone you have purchased was
designed to deliver quality performance and provide you with years of
use.  In order to maintain optimum performance, NEC recommends that
only NEC Authentic Accessories be used with the TalkTime phones.

The incineration, landfilling or mixing of nickel-cadmium (Ni-Cd) batteries
with municipal solid waste stream is PROHIBITED BY LAW in most areas.

Return this battery to a federal or state approved nickel-cadmium (or “sealed
lead”) battery recycler. This may be where you purchased the battery or
a local seller of automotive batteries. In all states, call 1-800-637-5917,
except Minnesota if further disposal information is required. In Minnesota,
call 1-800-225-PRBA.

Contact local waste management officials for other information regarding
the enviromentally sound collection, recycling and disposal of this battery.

In-Vehicle Operation:
For In-Vehicle Operations, the phones battery must be charged, since
In-Vehicle Adapter Kits serves only as a trickle battery charger.

IMPORTANT

READ THIS INFORMATION BEFORE

USING YOUR HAND-HELD PORTABLE

CELLULAR TELEPHONE

First introduced in 1984, the hand-held portable cellular telephone is one of the
most exciting and innovative electronic products ever developed. With it you can
stay  in contact with your office, your home, emergency services, and others.

For the safe and efficient operation of your phone, observe these guidelines.

Your cellular telephone is a radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) energy. The phone operates
in the frequency range of  824 MHz to 894 MHz and employs commonly used
frequency modulation (FM) techniques. When you use your phone, the cellular
system handling your call controls the power level at which your phone transmits.
The power level can range from 0.006 of a watt to 0.6 of a watt.

i

Содержание TalkTime Max 962




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды