background image

LOW BATTERY ALARM

The Low Battery Alarm warns the user when the battery power is getting low, by
emitting a short double tone. The double tone will sound 6 times at 10 second
intervals and the display will show RECHARGE BATTERY. After hearing these
tones you have approximately 60 seconds before the phone shuts itself off.

■ ■ ■ ■ ■

   RECHARGE

     BATTERY

If you have a call in progress, the phone terminates the call and turns off the phone
automatically.

ERROR TONE

A Error Tone will sound to inform the user of miss key operations, or when a keypress
is ignored.

SELF DIAGNOSTIC CHECK

The phone will show a blank display if it finds any trouble within the unit during its
self diagnostic check. If this occurs, immediately turn the phone off and return it to
your dealer for repair.

ALARM CLOCK FUNCTION

This is the time setting function to make the clock alarm. The power turns ON
automatically if the power is off at the alarm set time. The clock alarm operates only
once, therefore, it is necessary to reset the phone for the next alarm. The clock
alarm will sound for 20 seconds unless the [CLR] key is pressed. If no key is
pressed, the phone will turn off the power when the alarm stops. If any key except
[CLR] is pressed, the alarm continues for 20 seconds and phone remains on.

Setting the Alarm:

■ ■ ■ ■ ■

1) Press FCN + 2.

ON     - -  :  - -
OFF   - -  :  - -
ALM   - -  :  - -

flashing

2) Press STO. The flashing moves to the hour field.

■ ■ ■ ■ ■

ON    - -  :  - -
OFF  - -  :  - -
ALM  12  :  00  a

flashing

3) Enter Alarm Time(i.e.11). Press RCL during the time is
flashing to change to either AM or PM.

■ ■ ■ ■ ■

ON     - -  :  - -
OFF   - -  :  - -
ALM   11  :  00  a

flashing

-22-

Содержание TalkTime Max 962




















































Отзывы: