NetWare 4.x
85
NETWORK SETUP
N
ET
W
ARE
4.
X
Second, Install the Printer Driver
In Windows, use the
Add Printer
feature to install and
configure a SuperScript 4400 printer driver in each
workstation that will access the network printer.
note:
SuperScript 4400 printer drivers are on the
SuperScript 4400 Series CD
that comes with the printer.
Specify that the printer will be attached as a
Network Printer
,
and set the
Port
to the printer queue you just created. (The
Windows NT 4.0 driver installs automatically to
LPT1:
. After
installation, you can manually reset the port to your NetWare
queue.)
Third, use MAP and the Network Administration Page to
Configure the Network Printer
Now you must specify the
Print Server Name,
Preferred
NDS Context,
and
Preferred NDS Tree
using the Network
Administration Page options. Continue with the instructions
below, to do this.
1.
Run MAP.
a.
If you have not yet installed MAP, follow the
instructions on page 77.
b. In Windows 95/98 or Windows NT 4.0, click the
Start
button. Select
MAP
from the program group you
specified during installation. When MAP starts, a list
of all available units on the network is displayed by
unit serial number.
2.
Select the 4400N to configure.
a.
Click on a 4400N in the list to display its Network
Administration Page.
3.
NetWare 4.x (NDS) Configuration
a.
On the
Network Administration
Page, click on
Setup
NetWare
in the Protocols column.
b. In the NetWare Configuration menu that appears,
enter a name in the
Print Server Name
field, enter a
name in the
Preferred NDS Context
field, and enter
a name in the
Preferred NDS Tree
field. (Leave the
Preferred File Server field blank.)
c.
Enter the
password
and click on the
Accept Settings
button. (The default password is
sysadm
.)
4.
Turn the printer off and then on again to validate
network settings changes.
5.
Confirm Successful Configuration.
a.
In the Systems column, click on
Reset
. After the
Reset, turn the printer off and then on again.
b. Go back to the Network Administration Page, click
the
Network Administration
button. Then, in the
System column, click on
Unit Status
.
c.
In the dialog box that appears, scroll down to display
the NetWare Status. The Queue Status should be
Attached
.
d.
If the Queue Status is not shown as
Attached
, please
verify that the entries for Print Server Name,
Preferred NDS Context, and Print Server Password
match those defined in NWADMIN.
Содержание SuperScript 4400
