NEC SuperScript 4400, Руководство пользователя

Страница: 73 / 143

Pull Printing 65
WEB PRINTING SETUP
Changing PWS Settings
This section describes changes you must make to Microsoft’s
Personal Web Server for it to work as a Pull Printing Server.
You will need to
•
Set the home directory
• Add two virtual directories.
Setting the Home directory
1. If there is a Personal Web Server icon in the tool tray
(lower right-hand corner of your screen), double-click the
icon to bring up the Personal Web Manager. Otherwise,
press the Windows
Start button, select Programs , select
Microsoft Personal Web Server , and select the Personal
Web Manager .
2. Click on the Advanced button located on the left-hand
side of the screen.
3. In the Virtual Directories groupbox, highlight Home and
click the Edit Properties button.
4. You need to select the
htdocs
directory as your home
directory. If you already have an
htdocs
directory,
specify it as your home directory. If not, the Installation
Program for the Pull Printing Server added one for you
under your Personal Web Server’s root directory (i.e.
C:\Inetpub\). Enter that as the path to the htdocs
directory, i.e.,
C:\Inetpub\htdocs
note:
If you were previously using the Personal Web
Server as a web server, you must move any files you need
from your original home directory to the
htdocs
directory.
5. In the Access groupbox, select Read and Scripts and
de-select Execute .
Adding Virtual Directories
If you already have a cgi-gin directory at the same level as the
htdocs directory, and a virtual directory called cgi-bin which
points to the cgi-bin directory, you can skip the first five steps
below.
If the Pull Printing Server Installation Program did not detect
a cgi-bin directory on the same level as the htdocs directory, a
cgi-bin directory was added for you.
Follow the steps below create a virtual directory which
points to the cgi-bin directory.
1.
Click the Add button in Advanced Options.
2. Enter the fully qualified path of your cgi-bin directory
(e.g.
C:\Inetpub\cgi-bin
).
3. Enter
cgi-bin
as the Alias.
4. In the Access groupbox, select Read and Execute and
de-select Scripts .
5. Click OK .
You will now add a
wwwprnt
virtual directory.
1. Click the Add button in Advanced Options.
2. Enter the path to your
wwwprnt
directory. This is located
in your
\windows\system
directory.
3. Enter
wwwprnt
as the Alias.
4. In the Access groupbox, select Read and
de-select Scripts and Execute .
5. Click OK .
6. Exit the Personal Web Manager.