![NEC SL1100 Скачать руководство пользователя страница 188](http://html1.mh-extra.com/html/nec/sl1100/sl1100_feature-manual_3895675188.webp)
2.
Check your telephone system programming to be sure the telephone system is set up to receive
Caller ID and pass it to the InMail voice mail ports.
Program
Number
Program Name
Description
14-02-10
Analog Trunk Data Setup -
Caller ID
Enable (
1
) a trunk's ability to receive Caller ID data.
By default, a trunk's ability to receive Caller ID data is enabled (1)
(V3.5 Changed).
14-01-22
Basic Trunk Data Setup - Call-
er ID to Voice Mail
Enter
1
(Yes) to enable this option.
By default, this option is disabled.
20-09-02
Class of Service Options (In-
coming Call Service) - Caller
ID Display
Enter
1
(Yes) to enable the Caller ID display at an extension.
By default, this option is enabled (V3.5 Changed).
20-06-01
Class of Service for Exten-
sions
Assign Class of Service to extensions.
By default, Extension 101 is Class 15 and other extension are Class
1.
3.
Set up Trunk Group Routing.
Make Call callouts use Trunk Group Routing (dial
9
) when selecting outbound routes.
Program
Number
Program Name
Description
47-08-02
Screened Transfer Timeout
(Scrn Trf Timeout)
Set how long a Screened Transfer (TRF) from the Automated At-
tendant rings (0 ~ 255 seconds) an unanswered extension before
recalling.
Be sure that the 24-02-04 Transfer Recall Time is longer than the
setting of this option. If the Transfer Recall is shorter, Screened
Transfers recalls the same as Unscreened Transfers.
By default, this option is 15 seconds.
14-05-01
Trunk Groups
Assign trunks to trunk groups (
1
~
8
).
By default, all trunks are in group 1.
14-06-01
Trunk Group Routing
Set up Trunk Group Routing. There are 8 routing tables, with 4
routes in each table.
By default, the first route in routing table 1 is trunk group 1. No
other entries are defined. This makes trunk group 1 the dial 9
route by default.
Refer to Trunk Group Routing in the InMail Programming Manual for
more.
4.
Enable Loop Supervision for the trunks on which you are going to allow remote logons to use
Make Call.
Program
Number
Program Name
Description
14-01-13
Basic Trunk Data Setup -
Trunk-to-Trunk Transfer
Enter 1 to enable Loop Supervision for each trunk to be used for
External Transfer.
By default, this option is enabled for all trunks.
SL1100
ISSUE 3.5
2-170
Make Call
M
Содержание SL1100
