SL1000 Getting Started Guide
27
Entering the Telephone Programming Mode
The installer/system administrator can enter to the system programming mode from the Display Type
Key Telephone. (Up to
2 users
can enter to the mode at the same time)
--Program Mode
System data is identified by a Number.
Enter the number via the keypad to select the Program Number.
In a newly installed system, use extension port No.1.
1. How to entering the Programming Mode
Operation Display
shows;
1. Press
Speaker
key.
(Do not lift the handset)
2. Dial
# *# *
.
3. Dial the system password (default password =
12345678). Press
Hold
key.
4. Display shows Program Mode and Enter
Programming number directory to set the system
data.
2. Selecting the Programming Number
Each configuration setting within the SL1000 is identified by a Program Number (eg 22-05-01).
Operation Display
shows;
1. Ensure the LCD Display shows;
If it is not displayed press the
Mute
key several times
to step back.
2. Enter the Program Number e.g 22 05 01.
3. Exiting the Programming Mode
Operation Display
shows;
1. Press
Hold
key to Complete the programming.
2. Press
Mute
key several times to return to the
Program Number Entering Screen.
3. Press
Speaker
key or
Exit
key to exit the
Programming mode.
When the data save is complete, the phone returns to
normal operation.
Note) If you dial an incorrect Program Number, you can step back by pressing the
Mute
key.
If you enter incorrect data, you can step back without saving the setting by pressing the
Mute
key.
Program Mode
Program Mode
FRI 28 1:49PM
200
Password
Password@@@@@@@@
22-05-01Trunk1
Mode1 IRG=1
22-05-01Trunk1
Mode1 IRG=1
Program Mode
FRI 28 1:49PM
200
SavingSystemData
CompleteDataSave
