NEC SL1000, Руководство по программированию

Страница: 378 / 580

Program
47
Program 47 : InMail
47-02 : InMail Station Mailbox Options
Level
IN
Description
Use
47-02 : InMail Station Mailbox Options
to set up a station/extension mailbox. Station mailboxes
are automatically assigned as Subscriber Mailboxes. Normally, InMail Station Mailbox numbers 1~26
should correspond to extensions 200~225.
Station Mailboxes are one oft hree mailbox categories: Station, Routing, or Master. You can also set
up Master Mailboxes as Subscriber Mailboxes.
Input Data
Station Mailbox Number 1~128
t l u a f e D a t a D t u p n I m e t I . o N m e t I
01
Mailbox Type
Use this option to enable or disable the mailbox. An
extension mailbox is not accessible when it is
disabled (even though its stored messages and
configuration are retained in memory.) If disabled, a
user pressing
Message
initiates a remote logon and
is asked to enter their mailbox number. A voice
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
0 = None
1 = Personal
2 = Group 1
02
Mailbox Number
Use this option to select the extension number asso-
ciated with the mailbox you are programming.
Normally, mailbox 1 should use Mailbox Number
200, mailbox 2 should use Mailbox Number 201,101
etc.
To make programming easier, consider associating
a mailbox number with a station port. For example,
mailbox 1 could correspond to port 1, which in turn
corresponds to extension 200.
Up to four digits Mailbox 1 = 200
Mailbox 2~64= 201~263
Mailbox 65~ = No
Setting
03
Number of Messages
Use this option to set the maximum number of
messages that can be left in the Subscriber Mailbox.
If a caller tries to leave a message after this limit is
InMail then hangs up.
0~99 messages
To conserve storage space,
enter 0 for all unused
mailboxes. 99 for mailbox 1
20 for all other mail-
boxes
04
Message Playback Order
Use this option to set the Subscriber Mailbox
message playback order. When a subscriber listens
to their messages, VM8000 InMail can play the
oldest messages first (first-in/first-out, or FIFO), or
the newest messages first (last-in/first-out, or LIFO).
0 (FIFO = first-in/ first-out, or
oldest messages first).
1 (LIFO = last-in/ first-out, or
newest messages first) 0
05
Auto Erase/Save of Messages
Use this option to determine what happens when a
Subscriber Mailbox user completely listens to a new
message and then exits the mailbox without either
saving (
SA
) or erasing (
E
) the message. Depending
on the setting of this option, InMail either automati-
cally saves or erases the message. If the mailbox
user hangs up before listening to the entire new
message, InMail retains the message as a new
message.
0 = Erase
After the subscriber listens to
the entire new message and
hangs up, VM8000 InMail
erases the message.
1= Save
After the subscriber listens to
the entire new message and
hangs up, VM8000 InMail
saves the message. 1
Issue 0.1 SL1000
Program 47 : InMail
2-358
prompt then announces: “That mailbox does not
exist”.
reached, they hear: “That mailbox is full”. VM8000