NEC SIGMABLADE Series, Руководство пользователя

Страница: 48 / 68

(English)
26
Name Description
1. LAN port
- RJ-45 connectors (1000Mbps/Full Duplex) for LAN connections
- Connected to the LAN ports in the CPU Blade
- Each of the eight ports on the left side (marked with “
1”) is connected to the
LAN port 1 in each CPU Blade. Similarly, each of the other eight on the right
side (marked with “
2”) is connected to the LAN port 2.
- The number under each LAN port represents the number given to each CPU
Blade slot in the Blade Enclosure.
- Indicates the link status and activity of each LAN port
Off Link not established
On (Green) Link established
2. Link/Act LED
Blinking (Green) Data being transmitted or received
- Indicates a link speed.
- Operates at 1000Mbps only (Full Duplex)
3. Speed LED
Amber 1000Mbps
4. Reset Switch
- Press to restart the card.
- Pressing this button disconnects the link with the card and terminates
communication. The communication resumes in about five seconds.
5. ID LED Indicates the card being operated
6. Status LED
Indicates the card status.
Contact your service representative if it does not turn green in five minutes after
you power on.
7. Link LED
- Indicates the FC port link status.
- Each of the eight LEDs on the left side (marked with “FC1”) indicates the
respective link state of the port 0 on the FC Mezzanine Card in each CPU
Blade. Similarly, each of the other eight on the right side (marked with “FC2”)
indicates the respective link state of the port 1 on the FC Mezzanine Card.
- The number under each LED represents the number given to each CPU Blade
slot in the Blade Enclosure.
8. SFP slot
- Connected to the FC ports on the Mezzanine card in the CPU Blade.
- Requires a N8406-015 FC SFP module (optional) for each port.
- Each of the eight slots on the left side (marked with “FC1”) is connected to the
port 0 on the FC Mezzanine Card in each CPU Blade. Similarly, each of the
other eight on the right side (marked with “FC2”) is connected to the port 1 on
the FC Mezzanine Card.
- The number under each SFP slot represents the number given to each CPU
Blade slot in the Blade Enclosure.
9. Ejector Use this lever to install or remove a switch module from the Blade Enclosure.
* The N8406-013 1Gb Interlink Expansion Card is not equipped with the above 1 to 8.
The switch module power synchronizes with the power state of the Blade
Enclosure. These modules are not equipped with power-on/-off switches.