NEC S2900, Руководство пользователя

Страница: 48 / 168

31
(2) Connection of the disk array unit with a host system
a) With the host bus adapter or the FC-AL switch connectors of the "LC" type.
Use the available optionally FC cable (NF9320-SJ0xE). Push the connector at either end of
the cable into the FC connector (HPx) of the host bus adapter and either controller (CONT0
or CONT1) until a click is heard. The FC cable has the same connectors at both ends. Either
connector may be connected to the controller.
Pushing any connector excessively may damage the tip and decrease the optical
intensity, which will then cause a malfunction to occur.
Connect the connector at the other end of the FC cable to the host bus adapter or the FC-AL
switch,
installed at the host system.
<Connection example>
NF2900-SR40E
Host system
Host bus adapter
FC cable (LC-LC cable)
HPx
Similarly, connect the other controller with the other host bus adapter
or the FC-AL switch
installed at the host system.
b) With the host bus adapter or the FC-AL switch connectors of the "SC" type
Use the available optionally FC conversion cable (NF9310-SJ10E). The cable has
different-size connectors at the ends. Push the smaller connector into the FC connector (HPx)
for the host bus adapter of either controller (CONT0 or CONT1) until a click is heard.
Pushing any connector excessively may damage the tip and decrease the optical
intensity, which will then cause a malfunction to occur.
<Connection example>
NF2900-SR40E
Host system
Host bus adapter
SC-SC cable FC conversion cable
Relay connector
HPx
Connect the other end of the FC conversion cable to the SC-SC cable via the relay connector
provided with the FC conversion cable. Push the connector so that it clicks into place securely.
The connector at an end of the SC-SC cable is the same as that at the other end. Either of the
connectors may be connected to the relay connector.
Connect the connector at the other end of the SC-SC cable to the host bus adapter
or the
FC-AL switch installed at the host system.
Similarly, connect the other controller with another host bus adapter
or the FC-AL switch
installed at the host system.