1. System BIOS
Express5800/R120d-1E, R120d-2E Maintenance Guide
87
Chapter 2 Convenient Features
(2) Power Control Configuration submenu
From the
Server
menu, move the cursor to
Power Control Configuration
and then press the <Enter> key to
show its submenus.
For details about the options, see the table below.
Option Parameter
Descriptions
AC-LINK
Stay Off
[Last State]
Power On
Specify AC link feature. Specify how the DC power
state should be when the AC power is supplied again
after loss of power. (See the table below)
Power ON Delay Time Mode
[Manually Setting]
Random
Select a method to specify the delay time before
powering on DC power. Available options are:
"User-specified value" or "random value".
This option is selectable when
Power On
or
Last
State
is specified in
AC-LINK
.
Delay Time
[45]-600
Specify the delay time.
The minimum configurable time may differ from
factory-set value.
The minimum configurable time is displayed when
executing
Load Setup Defaults
.
This menu is selectable when
Manually Setting
is
specified for
Power ON Delay Time Mode
.
Standby Power Save
[Disabled]
Enabled
Enable or disable the feature that saves the standby
power in standby state. If this option is set to
Enabled
,
the
AC-LINK
setting is fixed to
Power On
automatically and cannot be changed. With AC power
off state, management, monitoring, and power-on of
server are disabled on remote site. Powering on the
server is available only by pressing the POWER switch
on the server.
If
AC-LINK
setting is changed from the remote site
with this option being set, you need to press the
POWER switch twice to power on the server.
