Installation Guide
QX-S6600 Series Ethernet Switches
6-15
Item
Description
7.
Skip current system
configuration
Start the switch with the factory default configuration. This is a one-time
operation and does not take effect at the next reboot. You use this option
when you forget the console login password.
8.
Set BootRom password
recovery
Disable or enable the Boot ROM password recovery function. By default,
Boot ROM recovery is enabled. You can disable this function to protect
system security.
CAUTION
:
If Boot ROM recovery is enabled, you can contact the NEC support to get a
super Boot ROM password to access the Boot menu after your Boot ROM
password is lost.
If Boot ROM recovery is disabled, you cannot use a super Boot ROM
password to access the Boot menu after your Boot ROM password is lost,
and must contact your NEC agent for help.
9.
Set switch startup mode
Set the startup mode of the switch to normal (full) mode or fast mode.
0.
Reboot
Restart the switch.
Ctrl+Z: Access EXTENDED
ASSISTANT MENU
Access the EXTENDED ASSISTANT MENU.
Ctrl+F: Format file system
Format file system
Ctrl+P: Change authentication for
console login
Change authentication for console login. You can use
super
commands
without entering the password.(this configuration is valid once)
Only when the password recovery capability is enable, this configuration is
effective.
Ctrl+R: Download image to
SDRAM and run
A system software image is downloaded and the switch is started. Only
when the password recovery capability is enable, this configuration is
effective.
6.5.3 Using TFTP to upgrade software images through the management
Ethernet port
1) Enter 1 in the Boot menu to access the file transfer protocol submenu.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
