Installation Guide
QX-S6600 Series Ethernet Switches
7 Maintenance and troubleshooting
7-2
2) Enter
Y
at the prompt. The system reboots without reading the current configuration
file.
The current setting will run with current configuration file when reboot.
Are you sure you want to skip current configuration file when reboot? Yes or No
(Y/N):Y
Setting...Done.
3) Enter
0
at the prompt. The switch reboots with empty configuration, and you can log in
through the console port without entering the password to check the configuration file
for the user password.
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-8): 0
Starting......
4) Use
reset saved-configuration
commands to delete next-startup configuration files,
and restart the switch.
