Installation Guide
QX-S6600 Series Ethernet Switches
6-31
8. Set switch startup mode
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-8): 2
2) Enter
1
at the prompt to set the attribute of a software image. (To set the attribute of a
configuration file, enter
2
.)
3) Enter
1
or
2
at the prompt to set the attribute of a software image in Version 7.1.6 or
later version. (To set the attribute of a configuration file, enter
3
.) Enter
1
at the prompt
to set the attribute of a software image in Version 7.1.3. (To set the attribute of a
configuration file, enter
2
.)
NOTE:
A setting method of the software image attribute was changed in Version 7.1.6 or later version.
When setting the Comware image attribute of the ipe file , input
1
, and specify " Set image file " . When setting
the Boot/System image attribute of the ipe file , input
2
, and specify " Set bin file " .
Only the Boot image of a bin file/System image attribute can be set in Version 7.1.3. Input
1
, and specify " Set
image file " .
(1) Version 7.1.6 or later version
Before modification:
1. Set image file
2. Set bin file
3. Set configuration file
0. Return to boot menu
Enter your choice(0-3): 1 or 2
(2) Version 7.1.3
1. Set image file
