Option Installation 3-13
CAUTION:
Reduce static discharge by
touching the system’s metal chassis.
3.
Align the notched ends of the module and socket (see Figure 3-11). Using equal
pressure, gently press the module into the socket. Repeat for the second module.
Figure 3-11 Aligning the Video DRAM Module with the Socket
4.
Replace any boards that were removed.
5.
Replace the system unit cover.
Processor Upgrade
The zero-insertion force (ZIF) socket accepts pin-grid-array (PGA) processors, such as the
primary processor or an OverDrive
processor.
CAUTION:
Incorrect installation of the
processor can damage the processor, system
board, or both. Follow the installation
instructions carefully.
The system requires a heatsink on the OverDrive
processor. Verify that you have the correct
heatsink for the processor.
When upgrading the processor, first remove the processor currently installed in the system,
then install the OverDrive processor.
Notched Corner
of Socket
Notched End
of Module
