3-14 Option Installation
VIDEO UPGRADE
Upgrade the video memory by adding the 2- or 6-MB video WRAM upgrade module to the
video board as follows.
1.
Remove the system unit cover as previously described.
2.
Locate the video WRAM sockets (see Figure Section 3-10).
If any expansion boards are obstructing your view of the sockets, remove the
boards (see Expansion Board Removal).
CAUTION:
Reduce static discharge by
touching the system's metal chassis.
3.
Align the notched ends of the module and the video board sockets (see
Figure Section 3-10). Using equal pressure, gently press the module into the
sockets.
Figure Section 3-10 Aligning the Video WRAM Module with the Video Board
Sockets
4.
Replace any boards that were removed.
5.
Replace the system unit cover.
