5-14 Repair
Figure Section 5-16 Removing the Device Rails
Rear Internal 3 1/2-Inch Drive Removal
Remove a second 3 1/2-inch hard disk drive from the system as follows.
1.
Remove the system unit cover as previously described (see “System Unit Cover
Removal” in this section).
2.
Unplug the power and signal cables from the 3 1/2-inch internal drive and the
standard hard disk drive installed in the rear internal drive bracket.
3.
Remove the two screws that secure the rear internal drive bracket (see
Figure Section 5-17).
