2-30 Using NECCSD Utilities
To take advantage of these features, DMI has expanded its
interface in the following areas:
Interrupts may be enabled or disabled.
High and low limits can be set and are displayed for
temperature and power supply voltages.
Current readings are displayed for temperature, power
supply voltages, and chassis state.
Interrupts can be detected when “out of range”
conditions occur. User prompts are displayed to alert the
user to a potentially harmful condition.
NEC AUTO BACKUP UTILITY
The NEC Auto Backup utility is a data management and
backup program (available on the NEC Select Install CD)
that operates in conjunction with LANDesk’s DMI and the
Self-Monitoring Analysis and Reporting Technology
(S.M.A.R.T) Hard Drive instrumentation. If the
S.M.A.R.T. drive identifies a potential problem, the NEC
Auto Backup utility automatically invokes the Cheyenne
Backup program and backs up the entire file system to a
user-selected backup device, such as a Zip drive, network
drive, or tape.
NEC Auto Backup can also do regularly-scheduled backups
and scan files for viruses during a backup operation.
NOTE
For the NEC Auto Backup utility to work,
Cheyenne Backup must be preconfigured. See the
NEC Auto Backup utility “Read Me” file for
information about Cheyenne Backup.
