![background image](http://html1.mh-extra.com/html/nec/powermate-ct/powermate-ct_release-note_3953420006.webp)
6 NEC PowerMate CT Release Notes
Product Recovery CDs for Windows 2000 and
Windows NT
If you have a Windows 2000/Windows NT configuration, you have two Product Recovery CDs.
You can identify the CD by the part number:
6786560055 is the Windows NT4 SP6 Recovery CD
6786570055 is the Windows 2000 Recovery CD.
LANDesk Client Manager Issues
The following sections describe LANDesk
®
Client Manager issues.
Note
In addition to the following issues, please review LANDesk Client Manager Software
Release Notes in the Help section of LANDesk to view some of the known issues and ways to
work around them.
Installing LANDesk Client Manager
When installing LANDesk
Client Manager, do not select the following components:
CMI
Alert on LAN.
Your system does not support CMI and Alert on LAN.
Selecting the CMI and Alert on LAN components causes the system to hang at the message
“New hardware found, Intel 82801AA SMBus controller Windows is installing the software for
your system.” This condition requires the reinstallation of your operating system and the
software that shipped on your hard drive.
Detecting Chassis Intrusion
LANDesk Client Manager does not detect chassis intrusion due to incompatibility between
LANDesk Client Manager and the hardware monitoring ASIC component on the system board.
If chassis intrusion in BIOS Setup is enabled and someone has tampered with the chassis, the
BIOS displays the message “Your Computer Case Had Been Opened” during system bootup. To
view the message, press the
Esc
key. The NEC logo bitmap closes and the message appears.
Viewing PCI Slot Information
The system board information in the inventory section of LANDesk Client Manager shows only
three PCI slots instead of four PCI slots. The status of the PCI slots is always reported as
unknown. This PCI reporting is due to the incompatibility between LANDesk Client Manager
and the hardware monitoring ASIC component on the system board.
Displaying Contents & Indexes
See the following conditions about displaying “Contents & Indexes.”