NEC PowerMate CT, Инструкция по обслуживанию и справочник

Страница: 38 / 167

System Configuration 2-11
Main Menu Items
Menu Item Settings (default is bold)
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave 10263 MB
None
CD-ROM
None
Note: The following setting information applies to the
primary and secondary master and slave devices.
Each device menu item displays the hard drive or CD-ROM
identifier if a device is installed.
If you install a hard drive that does not feature auto IDE
type detection or your IDE hard drive was formatted on
another system with parameters different from those
reported by the drive, enter a parameter for each of the
fields in the device submenu.
Bring up a device submenu by pressing Enter. Each
submenu and its fields are described next.
Type
User, Auto, None, CD-ROM, IDE/ATAPI Removable
When set to Auto, the values for Cylinders, Heads,
Sectors, Multi-Sector Transfer, LBA Mode Control, Transfer
Mode, and Ultra DMA Mode are displayed but are read
only.
When set to Auto, the BIOS detects what the drive is
capable of, not the translation mechanism that was used to
format the drive. If a drive is run in a mode other than the
mode in which it was partitioned and formatted,
unpredictable results might occur, including data loss.
When set to None, informs the system to ignore this drive.
When set to CD-ROM or IDE/ATAPI Removable, allows
the manual entry of all fields described next.
When set to User, allows the manual entry of all fields
described next.
Cylinders When Type is Auto, value in the Cylinders field is auto-
detected and field is read only.
Heads When Type is Auto, value in Heads field is auto-detected
and field is read only.
Sectors When Type is Auto, value in Sectors field is auto-detected
and field is read only.
Maximum Capacity 8455 MB
Total Sectors 20044080 total sectors
Maximum Capacity
10263 MB