NEC POWERMATE 2000 - S 02-2000, Руководство по выпуску

Страница: 10 / 10

10 NEC PowerMate 2000 Series Release Notes
Getting CD-ROM Support in Command Prompt Only Mode
CD-ROM support is not available when you select
F8
at the “Starting Windows 9x” prompt and
select the Command Prompt Only option. To initiate CD-ROM support in the Command
Prompt Only mode, run DOSSTART.BAT which is located in the C:\WINDOWS directory.
Display Capabilities
The following information replaces the PowerMate 2000 LCD panel display information in the
PowerMate 2000 Series User’s Guide:
„
Default brightness
The default brightness is set at the maximum brightness level. Powering off the system or
unplugging the system from the power outlet changes any new brightness setting to the
maximum default brightness.
„
Maximum viewing angles
Horizontal – 60 degrees from the center to the right or left side of the LCD panel.
Vertical – 40 degrees from the center of panel and upwards;
50 degrees from the center of the LCD panel and downwards.
Fix OS Restore Option
Fix OS is a Restore option on the NEC OS Restore CD for PowerMate systems with the
Windows 95 and Windows 98 operating systems. The Fix OS restore option reinstalls the
Windows operating system while leaving data files intact. It allows you to restore your system to
the point where you can back up your data files. This option is intended as a precursor to a full
format and restore (see “Fixing the Operating System” in Chapter 3 of the PowerMate 2000
Series User’s Guide).
The Fix OS restore option attempts to restore the Windows operating system as it was shipped
on your system. If you updated any of the applications that shipped with the system, such as
Internet Explorer, the Fix OS function might display a series of error messages. If error
messages are displayed, move the error message windows so that they are not layered on top of
each other. Click the
OK button to continue the Fix OS restore process.
NEC Power Mate 2000 Series
Release Notes
455-00297-000
2/2000