E – 21
Setting the color temperature
Use this procedure to set color tone produced by the plasma
display.
Example: Setting "1"
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the
▲
and
▼
buttons to select “PICTURE”, then
press the “OK” button.
The “PICTURE” screen appears.
2. Use the
▲
and
▼
buttons to select “COLOR TEMP”.
P I C T U R E
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP.
NR
RETURN
EXIT
MEMORY
2
NR-1
:
:
:
OK
R
G
3. Use the
䊴
and
䊳
buttons to select "1".
The mode switch as follows when the
䊴
and
䊳
buttons
are pressed:
→
1
↔
2
↔
3
↔
PRO
←
* See page E-22 to set "PRO".
P I C T U R E
PICTURE MODE
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
COLOR TEMP.
NR
RETURN
EXIT
MEMORY
1
NR-1
:
:
:
OK
R
G
If neither the
䊴
or
䊳
button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
4. Press the “OK” button.
The “COLOR TEMP.” is set to “1”.
Information
䡵
Setting the color temperature
1 .........................
High (bluer)
2 .........................
Middle (Standard)
3 .........................
Low (redder)
䡵
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.
COLOR TEMP.
1
:
5. Once the setting is completed...
Press the “MENU” button.
All menus disappear.
