NEC Pinwriter P2000/P2X, Руководство пользователя

Страница: 21 / 64

Section 3 Control Panel 13
FEEDROAD
Button
Press to sheets or continuous
to the print Position.
Press and release to one line.
With sheet loaded, press and hold
button for one second or more to eject
sheet.
With continuous loaded, press and
hold this button for one second or more to
the form feed and then feed
to the tear off position.
After to tear off Position,
press and release this button to back
to the print position.
Press this button simultaneously with
MODE
to back continuous off the platen to
“park” them while using sheets.
Press and hold this button while on
the to start the self-test
With the sheet installed, press this
button simultaneously
MODE
to eject
sheet in the
Display
In selection mode, the printed show light Operation to the
MODE and lights to indicate selected font or pitch. See
Font
means is on.
means the light is
means that light is
SELECTING THE FONT AND PITCH
You select the font and pitch by using the control buttons or Software control
(see Section 6). This provides how to select the font and pitch with the
control buttons.
Check that the is tumed on and no print data is in the
Press MODE. The enters selection mode (MODE light
once a second and SELECT light goes
Press MODE to the font. To the pitch, press FEEDROAD. After
the button, the indicates the currently selected font or pitch by
the combination of the MODE and SELECT lights.
Press MODE or FEEDROAD until the desired font or pitch is displayed (see Table
3-l).
Press MODE and simultaueously. The stores the new setting
and quits the selection mode.