NEC PH1000U, Руководство пользователя

Страница: 122 / 255

108
5. Using On-Screen Menu
Menu Item Default Options
SETUP
OPTIONS(1)
AUTO ADJUST NORMAL OFF, NORMAL, FINE
FAN MODE
AUTO MODE: AUTO, HIGH, HIGH ALTITUDE
FLOOR
SETTING: FLOOR, CEILING, VERTICAL TILT UP, VERTICAL
TILT DOWN ([VERTICAL TILT UP] and [VERTICAL TILT
DOWN] are not available on this projector.)
SIGNAL SELECT(COMP3)
RGB/
COMPONENT
RGB/COMPONENT, VIDEO
SEAMLESS SWITCHING OFF OFF, ON
COLOR SYSTEM
VIDEO AUTO
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,
SECAM
S-VIDEO AUTO
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,
SECAM
COMPUTER3
(VIDEO)
AUTO
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,
SECAM
SLOT POWER
PROJECTOR ON OFF, ON
PROJECTOR
STANDBY
ENABLE DISABLE, ENABLE
OPTIONS(2)
STANDBY MODE NORMAL NORMAL, POWER-SAVING, NETWORK STANDBY
DIRECT POWER ON OFF OFF, ON
AUTO POWER ON(COMP1/3) OFF OFF, COMPUTER1, COMPUTER3
AUTO POWER OFF OFF OFF, 0:05, 0:10, 0:20, 0:30
DEFAULT SOURCE SELECT LAST
LAST, AUTO, COMPUTER1, COMPUTER2, COMPUTER3,
HDMI, DisplayPort, VIDEO, S-VIDEO, VIEWER, NETWORK
EDGE BLENDING MODE OFF
OFF, ON
(ON: TOP, BOTTOM, LEFT, RIGHT, BLACK LEVEL)
INFO.
USAGE TIME
LAMP 1 LIFE REMAINING
LAMP 2 LIFE REMAINING
LAMP 1 HOURS USED
LAMP 2 HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE(1)
INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO.
SOURCE(2)
SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
WIRED LAN
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
WIRELESS
LAN(1)
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
WIRELESS
LAN(2)
SSID
NETWORK TYPE
WEP/WPA
CHANNEL
SIGNAL LEVEL
VERSION (1)
FIRMWARE
DATA
FIRMWARE2
VERSION (2) FIRMWARE3
OTHERS
PROJECTOR NAME
MODEL NO.
SERIAL NUMBER
LAN UNIT TYPE
CONTROL ID (when [CONTROL ID]
is set)
RESET
CURRENT SIGNAL
ALL DATA
ALL DATA(INCLUDING ENTRY LIST)
CLEAR LAMP 1 HOURS
CLEAR LAMP 2 HOURS
CLEAR FILTER HOURS