CHAPTER 4 OPERATION USING GUI SOFTWARE
User’s Manual U17307EJ2V0UM
44
(b) Advance setup
This menu is used to specify command options and security flag setting.
The Advance tab is displayed by clicking Advance.
Figure 4-11. Device Setup Window – Advance Tab
<1> Command
options
Specify the options for the FPL2 flash processing commands in this area.
Figure 4-12. Device Setup Window – Command Options
[Blank check before Erase check box]
If this check box is checked, a blank check is performed before execution of the [Erase] and
[Autoprocedure (EPV)] commands. If the result of the blank check is OK, erase processing is not
executed.
[Read verify after Program check box]
This item is not supported.
[Security flag after Program check box]
If this check box is checked, automatic programming of the selected security flag is executed after
execution of the [Program] and [Autoprocedure (EPV)] commands.
