NEC NP-18LU03, Руководство пользователя

Страница: 19 / 82

19
1. What’s in the Box? and the Names of the Projector Parts
1-3. Names of the Projector Parts
1-3-1. Front of the projector
14
5
1 2
3
6
12
7
13
11
4
8
10
9
1. LIGHT status indicator
Displays the status of the light source. The indicators turn on when the light source is on and turn off when the light source is off
(See page
65 ).
2. SYSTEM status indicator
These indicate the status of the projector. When the projector is operating normally, these light/blink in green or orange. When
an error occurs, they light/blink in red. When an error occurs, check the contents of the display on the LCD screen. (See page
65 )
3. Light power switch
While AC power is being supplied, set the projector power switch and light power switch to ON position, then your projector will
enter a standby state.
4. AC input
Connects to the AC power cable. The AC power cable is not an accessory. Consult with your dealer/distributor about the AC
power cable.
5. Switch for administrator
The projector can be operated normally by inserting the administrator key horizontally and turning it clockwise to the vertical
position.
At this time, the administrator key cannot be removed. The projector will not function unless the administrator key is inserted.
6. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of pro-
jected screen. (See page
23 )
7. Connection terminals
Various image signal cable are to be connected here. (See page 22 )
You can expand signal input terminals by installing the optional board.
Contact your dealer/distributor for more information on separately sold optional products.
8. Air inlet
The air inlet for cooling inside the projector. Do not cover.
Air filters are provided on the air intakes to prevent dust from entering the projector.