NEC Nighthawk XT4100 страница 41 Скачать руководство пользователя | Manualshive

Страница: 41 / 54

background image

E – 34

Projector Options

Enables you to set preferences and other operating options.

Timer

Enables you to turn the projector on or off automatically at a specified
time. Two timer functions are available: On/Off Timer and Sleep Timer.

[On/Off Timer]

Up to eight settings can be programmed.

• Before setting On/Off Timer, make sure that Date, Time Preset feature is

set.

• Even after setting On/Off Timer, turning the projector on or off with the

remote control is possible.

• There are two time display formats: 24-hour or AM/PM format.

1. Open the On/Off Timer window.

2. Select EDIT and press ENTER on the remote control to open the EDIT

window.

3. Set the Week, Day, On-Time and Off-Time using the Select buttons and

Source buttons (1 thru 10). To cancel the on-time or off time, use Delete.

4. Select Set and press the ENTER button on the remote control to complete

the setting. To close, select Close.

Lamp Mode

This feature allows the lamp power supply to operate under three set-
tings.

Auto ............. This setting keeps the projector's original light output level

for a certain period of time.

High-Bright (XT5100 only)

.................... This setting consumes maximum current from the AC input

and results in the most light output.

NOTE: The High Bright mode shortens the lamp life. Be sure
to use this mode at temperature of 95˚F (35˚C) or less.

Variable ........ This setting allows the lamp power supply to draw a variable

amount of current from the AC input source and allows for
maximum power consumption and variable light output.

Lamp Output

Lamp

Returns all adjustments and settings to the factory preset level.

All Data ....................... Reset all the settings for all the signals to the factory

preset.

NOTE: The items that can be reset are all the settings and adjusts except for
Language, Projector ID, Lamp Hour Meter, Projector Usage and Communi-
cation Speed.

Including Entry List
Also deletes all the signals in the Entry List and re-
turns to the factory preset.

Current Signal ............. Resets the adjustments for the current signal to the

factory preset levels.

NOTE: All the items in "Adjust (Source)" can be reset.

Reference White Balance

This feature adjusts the white balance that is used as a reference.
This adjustment affects all sources. The Ref.White Bal. is available
for test pattern only.

Factory Default

When selecting "Variable", use the slidebar to adjust for desired projec-
tor light output.

«
...
39
40
41
42
43
...
»

Содержание Nighthawk XT4100























































Отзывы:

Нет отзывов

Похожие инструкции для Nighthawk XT4100

51MP6100D - 51" Widescreen Hd Ready Tv

Бренд: Magnavox Страницы: 38

Бренд: NEC Страницы: 64

Бренд: NEC Страницы: 6

Бренд: D-ILA Страницы: 57

X2 multi-use perfomance

Бренд: InFocus Страницы: 67

Roll Away R6500 Series

Бренд: R. Lang Company Страницы: 6

MultiSync LT140

Бренд: NEC Страницы: 44

Бренд: Intermatic Страницы: 4

Бренд: Ubiquiti Страницы: 14

LIGHTSTYLE LS-7

Бренд: Runco Страницы: 100

Бренд: Qomo Страницы: 62

Бренд: Optoma Страницы: 118

Бренд: Hitachi Страницы: 109

Бренд: JVC Страницы: 37

HD100 - DLA - D-ILA Projector

Бренд: JVC Страницы: 162

Бренд: LG Страницы: 44

Бренд: Panasonic Страницы: 1

Бренд: Panasonic Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды