NEC NEAX2400 ICS, Руководство по программированию

Страница: 281 / 1089

NEAX2400 IPX Feature Programming Manual
Page 238
NDA-24297, Issue 1
C-81 Call Forwarding - I’m Here
C-81 Call Forwarding - I’m Here
General Description
This service feature permits the CALL FORWARDING - ALL CALLS feature to be set/cancelled from the target
station.
Operating Procedure
To set from the target station
1. Go off-hook; receive dial tone.
2. Dial the CALL FORWARDING - I'M HERE access code (from the target station); receive special dial
tone.
3. Dial the forwarding telephone number; receive service set tone.
To cancel from the target station
1. Go off-hook; receive dial tone.
2. Dial the CALL FORWARDING - I'M HERE cancel code (from the target station), receive special dial
tone.
3. Dial the forwarding telephone number; receive service set tone.
To cancel from the called party/forwarding party
1. Go off-hook; receive dial tone.
2. Dial the CALL FORWARDING - ALL CALLS cancel code (from the called station), receive special dial
tone.
Service Conditions
1. The following stations cannot set CALL FORWARDING - I'M HERE:
a.) a station where CALL FORWARDING - I'M HERE is being set,
b.) a station setting CALL FORWARDING - ALL CALLS [C-5].
2. CALL FORWARDING - I'M HERE can be set to the following stations:
a.) a station setting CALL FORWARDING - I'M HERE,
b.) a station where CALL FORWARDING - ALL CALLS [C-5] is being set.
3. A call can be forwarded multiple times following CALL FORWARDING - I'M HERE setting, if assigned
in system data.
4. CALL FORWARDING - I'M HERE can be set or cancelled from a subline of a D
term
. However, the
transferred call terminates to the MY Line of the D
term
that has set the service.
5. CALL FORWARDING - I'M HERE can be set or cancelled when the target station is idle.
6. CALL FORWARDING - I'M HERE can be cancelled from the forwarding station, following the CALL
FORWARDING - ALL CALLS [C-5] cancellation procedure.
7. If Call Back is set to/by the station setting CALL FORWARDING - I'M HERE, Call Back takes
precedence.
8. Other service conditions are the same as for CALL FORWARDING - ALL CALLS [C-5].
9. The target station in the remote node can set CALL FORWARDING - I’M HERE through FCCS link.
10. When using the FCCS network, there is no limit to the number of stations that may access this feature
simultaneously.
11. When using the FCCS network, a Service Feature Restriction Class (SFC) is necessary for the forwarded
destination and the forwarding party.