26
Additional Operation - VCR part
Recording from External Components
With this video recorder you can make recordings from
an external source, such as copying from
another video recorder or a camcorder.
Note:
In the following description, this video recorder will be
one used for recording and will be referred to as VCR B.
The other appliance will be used for playback and will
be referred to as VCR A.
1. VCR A should be connected to the AUDIO L/R
(VCR IN AV1)/VIDEO (VCR IN AV1) on the rear
panel of your unit or AUDIO IN (L(MONO)/R) /
VIDEO IN on the front panel of your unit.
2. Insert the recorded tape into VCR A and a blank
tape into VCR B.
3. Press
AV
until the socket you wish to record from is
displayed. (VCR B)
AV 1
for recording from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) terminals on the rear of your
unit.
AV 2
for recording from AUDIO IN (L(MONO)/R)/
VIDEO IN terminals on the front of your unit.
4. To start recording, press the REC/QSR on VCR B
and PLAY on VCR A.
5. When you want to finish copying, press the STOP
on both video recorders.
Notes:
•
Before recording, confirm the recording start
position.
•
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
Copyright on page 5 for more details.
•
To record for a fixed length of time, see Instant
Timer Recording.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD deck
and close the disc tray.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want to
start dubbing using the
N
, BACKWARD,
FORWARD and PAUSE functions.
For best results, pause playback at the point from
which you want to record.
4. Press REC/QSR on the Remote Control.
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
you may need to press
N
manually to begin
copying.
5. When the DVD is finished playing, press STOP to
end copying.
Notes:
•
If the DVD you are attempting to copy is copy pro-
tected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Discs). “LOCK” is displayed in the display window.
•
You must stop the copy process manually when the
DVD movie ends, or the unit may rep lay and record
over and over again.
•
When you stop the DVD playback during copying,
the recording on VCR is stopped automatically.
Содержание NDT-43
Страница 38: ...P NO 3834RV0045H ...
