NEC N8120-011F, Руководство пользователя

Страница: 30 / 166

10 About US40a
Express Card Slot
Only by inserting a memory card or a simply replaceable device into this Express Card slot, you can
add a hardware feature provided by a storage device, a wired or wireless communication card or a
safety device to US40a.
US40a can accept two types of Express Cards, or Express Card/34mm (width 34 mm) and Express
Card/54 mm (width 54 mm and L shape). The connectors on Express Cards of both types have the
same width (34 mm).
Standard cards are 75 mm in length (shorter than that of CardBus by 10.6 mm) and 5 mm in
thickness. Portions extended outward from the standard shape of the card due to an antenna or
socket may be thicker than 5 mm.
Inserting Express Card into Express Card Slot
Insert an Express Card into the Express Card slot in the following steps:
1.
Align the Express Card to the connector so that the connector of the card faces the slot.
The arrow or the label shows the top side of the Express Card.
2.
Slide the Express Card in the slot and press firmly until it is completely seated in its
connector.
3.
The Express Card is automatically detected and a proper driver is installed.
The system may request you to use the driver supplied by the manufacturer. If this occurs,
insert the driver CD coming with the Express Card.
To inform you of success in the installation, US40a beeps twice.
Ejecting Express Card from Express Card Slot
Press the Express Card to eject it from the Express Card slot.
AC Power Port
Connect the AC adapter coming with US40a to this AC power port to supply AC power.
IMPORTANT:
Be sure to use the AC adapter and the 2-pin power
cord coming with US40a. Using another adapter and/or power cord
may cause the system to be damaged even if they seem to be the same
as the attached ones.