NEC N8100-1422F, Руководство пользователя

Страница: 80 / 414

4-12 Configuring Your Server
Security
The Security menu appears if you move the cursor to the position of "Security."
Press Enter on "Set Supervisor Password" or "Set User Password," to display the password entry
screen.
Enter the passwords on the dialog box.
IMPORTANT:
„
User password can be set only when Supervisor password is already
set.
„
Set the passwords only after OS is installed.
„
If you forget the passwords, contact your service representative.
See the table below for the items.
Option Parameter Description Your Setting
Security Chip
Configuration – Security Chip Configuration submenu
is displayed.
Supervisor
Password Is Clear
Set Indicates the password setting status.
User Password Is Clear
Set Indicates the password setting status.
Set Supervisor
Password Up to eight
alphanumerics Press Enter to display the supervisor
password entry screen. This password
enables all the SETUP menus to be
accessed. This setting can be done
only on login with the password input
of "Supervisor" at start of SETUP.
Set User
Password Up to eight
alphanumerics Press Enter to display the user
password entry screen. For this
password, accessing to the SETUP
menu is restricted.
Password on boot [Disabled]
Enabled Specify whether the passwords are
entered or not on booting. At first the
supervisor password must be set. If
the supervisor password is set and
this option is disabled, BIOS
determines that a user is booting.
Fixed disk boot
sector [Normal]
Write Protect Specify whether to permit writing into
boot sector of the hard disk drive or
not.
Power Switch
Inhibit [Disabled]
Enabled Specify whether to enable or disable
the power switch feature.
(Forced shutdown (pressing the
POWER switch for at least four
seconds) feature is always acceptable
to the server.
[ ]: Factory-set