11
12
Remote Control Unit
NOTE: When not in use the remote control unit is conveniently stowed in the
holder on the rear panel.
1
POWER ON/OFF
Press POWER ON to turn the monitor on when the STANDBY/POWER
indicator is lit red.
Press POWER OFF to turn the monitor off and the monitor will go into the
standby condition.
2
DEGAUSS
Press to demagnetize the picture tube in the manual operation. See also
page 27.
3
Input Select
VIDEO 1 .....
Press to select an NTSC, PAL, SECAM or M-NTSC
compatible video source from a VCR, laser disc player, document camera,
or an S-Video source from a VCR connected to the VIDEO 1 IN terminal.
VIDEO 2 .....
Press to select an NTSC, PAL, SECAM or M-NTSC
compatible video source from a VCR, laser disc player, document camera,
or an S-Video source from a VCR connected to the VIDEO 2 IN terminal.
RGB 1 .......
Press to select an RGB video source from a computer
connected to the RGB 1 IN terminal.
RGB 2 .......
Press to select an RGB video source from a computer, NEC
scan converter or document camera connected to the RGB 2 IN terminal.
79644641
POWER
ON
RGB 2
RGB 1
VIDEO 2
VIDEO 1
POSITION / CONTROL
PROCEED
EXIT
SCAN
NORMAL
SIDE PIN
HEIGHT
WIDTH
BRIGHT CONTRAST MUTE
NORMAL
VOLUME
OFF
DEGAUSS
MULTIMEDIA MONITOR
RD-346E
3
4
OSM Control
4
POSITION/CONTROL
POSITION
(
) ......
Adjusts the vertical position of the image up and
down, and the horizontal position of the image from left to right.
CONTROL ( + / - ) .....
Moves the bar in the + or - direction to increase or
decrease the adjustment in an OSM menu.
CONTROL( / ) ..
Select one of the controls in an OSM menu. Press to
select a higher item in the menu; press to select a lower item in the menu.
5
PROCEED
Press to access OSM. When an adjustment item is selected, a press of this
button returns to its icon selection screen.
6
EXIT
Press to exit the OSM mode.
NOTE:
The direct keys such as BRIGHT, CONTRAST, WIDTH, HEIGHT,
SIDE PIN can access each control while in the OSM mode.
2
1
5
6
Содержание MultiSync XM29 Plus
Страница 40: ......