background image

English-45

English

WEEE Mark (European Directive 2012/19/EU)

 

Within the European Union

EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic 
products carrying the mark (left) must be disposed of separately from normal household waste. This includes 
monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your 
NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased 
the product, or if applicable, follow any agreements made between yourself and NEC.

The mark on electrical and electronic products only applies to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority 
so as to comply with the correct disposal method.

 

For EU: 

The crossed-out wheeled bin implies that used batteries should not be put to the general household 

waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in 
accordance with legislation.

According the EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall be separated to 
collect by local service.

Содержание MultiSync V552
















































Отзывы: