1-10
English-9
English
Tilt
Grasp both sides of the monitor screen with your hands and adjust the
tilt as desired (
Figure TS.1
).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Remove the connector cover and cable cover (
Figure R.1
).
2. Disconnect all cables.
3. Place monitor face down on a non-abrasive surface (
Figure R.2
).
4. Remove the 4 screws connecting the monitor to the stand and lift off
the stand assembly (
Figure R.2
) the monitor is now ready for
mounting in an alternate manner.
5. Connect the AC cord, signal cable and audio cable to the back of the
monitor (
Figure R.3
).
6. Reverse this process to reattach stand.
NOTE:
Use only VESA-compatible alternative mounting method.
Figure TS.1
