NEC MultiSync EA242F, Руководство пользователя

Страница: 47 / 50

English−45
English
MENU TOOLS Menu
SENSOR INFORMATION If you select [ON], the monitor displays a “HUMAN SENSOR ON” message. If you select [OFF], the
monitor doesn’t display the “HUMAN SENSOR ON” message.
KEY NUIDE If you select [ON], the Key Nuide appears on screen when the OSD menu is accessed.
DATA COPY To initiate data copy from the master monitor to the sub-monitor(s), select [DATA COPY] and touch the
INPUT/SELECT key. A “PROCEEDINN...” indicator will appear on the screen.
NOTE:
This function is only intended for the master monitor in ControlSync.
All of the settings specified in the ControlSync chart (see
page 22 ) will be copied from the
master monitor to the sub monitor(s).
CUSTOMIZE SETTINN Store the current settings for easy recovery.
To store current settings: Touch the INPUT/SELECT key. After a warning message appears, touch the
ECO/RESET key and the current settings are stored.
To restore settings: Touch the MENU key for 3 seconds or more when the OSD menu is closed.
MULTI DISPLAY
MULTI DISPLAY Menu
MONITOR NO. This function is for [INDIVIDUAL ADJUST].
Sets the monitor number for each monitor.
Control a sub-monitor from the master monitor by [INDIVIDUAL ADJUST]:
This function is for controlling a sub-monitor from the master monitor. It is useful if the sub-monitor is
located at an unreachable spot.
Please set the monitor number for each monitor. If you set a unique number to each of the monitors, you
can control a specific monitor. If you set duplicate numbers to some of the monitors, you can control the
monitors that have the same number simultaneously.
NOTE:
A master monitor should be connected only with ControlSync OUT. Do not connect a
master monitor with ControlSync IN. See ControlSync for information about master and sub-
monitors (
page 21 ).
TARNET MONITOR NO. Controls a sub-monitor’s OSD by using the master monitor’s control keys.
Sets the sub-monitor number that is set at [MONITOR NO.]. By touching the INPUT/SELECT key, each
sub-monitor displays its monitor number.
INDIVIDUAL ADJUST
ON Controls an individual sub-monitor from the master monitor.
Once [ON] is set, operation at the master monitor reflects to the sub-monitor OSD.
To disable [INDIVIDUAL ADJUST], please touch the INPUT and MENU keys simultaneously.
NOTE:
Please connect monitors with the ControlSync cables.