NEC MultiSync EA231WU, Руководство пользователя

Страница: 12 / 31

English-10
Mount Flexible Arm
This LCD monitor is designed for use with a flexible arm.
1. Follow the instructions in how to
Remove the Monitor Stand for Mounting
.
2. Using 4 screws that meet the specifications listed below, attach the arm to the monitor ( Figure F.1 ).
Figure F.1
100 mm
100 mm
Thickness of Bracket (Arm)
2.0~3.2 mm
12 mm
Spring washer
Flat washer
CAUTION:
฀฀ •฀ Only฀use฀4฀M4฀sized฀screws฀when฀mounting฀to฀avoid฀damage฀to฀the฀monitor฀and฀stand.฀
•฀ To฀meet฀the฀safety฀requirements,฀the฀monitor฀must฀be฀mounted฀to฀an฀arm,฀which฀guaranties฀the฀necessary฀
stability under consideration for the weight of the monitor. The LCD monitor should only be used with an
approved arm (e.g. TUEV GS mark).
•฀
Tighten฀all฀screws฀(recommended฀Fasten฀Force:฀98฀-฀137N•cm).
A loose screw may cause the monitor to fall off the arm.
•฀ Attaching฀the฀flexible฀arm฀should฀be฀done฀by฀two฀or฀more฀people฀if฀the฀monitor฀cannot฀be฀placed฀face฀
down on a flat surface for installation.