![background image](http://html.mh-extra.com/html/nec/minicube2/minicube2_user-manual_247981074.webp)
CHAPTER 4 HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
User’s Manual U18371EJ1V0UM
74
(4) Connecting the target system
Connect MINICUBE2 to the target system as shown in Figure 4-20. Select a 10- or 16-pin target cable
according to the target system circuit (refer to
Remark
below).
Perform connection
before the power to the target system is turned on
Figure 4-22. Connecting MINICUBE2 to Target System
Target system
MINICUBE2
10-/16-pin target cable
78K0-OCD
board
Target system
MINICUBE2
10-/16-pin target cable
78K0-OCD
board
Remark
Connect the 78K0-OCD board and the 10-/16-pin target cable as shown below. Do not connect both
the 10-pin target cable and 16-pin target cable.
With 10-pin cable: Connect CN2 on the 78K0-OCD board to the 10-pin target cable (Figure 4-23).
With 16-pin cable: Connect CN3 on the 78K0-OCD board to the 16-pin target cable (Figure 4-24).
Figure 4-23. With 10-Pin Connector
Figure 4-24. With 16-Pin Connector
Caution Connect the 78K0-OCD board to the target cable so that pin 1 position (
▲
) on each side
match.
Содержание MINICUBE2
Страница 2: ...User s Manual U18371EJ1V0UM 2 MEMO ...