NEC ME401X, Руководство пользователя

Страница: 112 / 133

101
7. Maintenance
4. Remove dust from the filter unit and the filter cover.
Clean both outside and inside.
5. Attach the four filters to the filter unit and the filter cover.
Filter unit: Attach two coarse-texture sponge filters (large and
small) to the filter unit.
Filter cover: Attach two fine-texture sponge filters (large and small)
to the filter cover.
The fine-texture sponge filter has slits on it. Align these slits with
the protrusions of the filter cover.
Coarse-texture
sponge
Fine-texture
sponge
6. Attach the filter cover back to the filter unit
Align the filter unit with the filter cover and push the six protrusions
into place.
• Make sure all six mounting points are aligned properly.
7. Put the filter unit back to the projector cabinet.
Insert two catches of the tip of the filter unit into the groove of the
cabinet, and push the button to close the filter unit.
• Push the filter unit until it clicks into place.
8. Clear the filter usage hours.
Plug the power cord into the wall outlet, and then turn on the
projector.
From the menu, select [RESET]
→
[CLEAR FILTER HOURS]. (
→
page 85 )
The interval time to clean the filters is set to [OFF] at time of ship-
ment. When using the projector as it is, you do not clear the filter
usage
Button Groove