background image

English-3

English

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT 
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE 
PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

WARNING

THIS APPARATUS MUST BE EARTHED BECAUSE OF CLASS I EQUIPMENT.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO 
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. 
DO NOT REMOVE COVER (OR BACK COVER). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 
QUALIFIED SERVICE PERSONNEL.

CAUTION

Power Cord Important Information

CAUTION: 

Please use the power cord provided with this display in accordance with the table below. If a power cord is not 

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the 
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
When you use this Display in North America, you should use a North America Hospital Grade power cord.

Country

U.S.A. / Canada

EU (except U.K.)

U.K.

Chinese

Japan

Plug Shape

Voltage

120

230

230

220

100

NOTE:

 

This product can only be serviced in the country where it was purchased.

Содержание MD211G5




























Отзывы: