NEC M166C, Руководство инженера-клиентской службы

Страница: 15 / 56

Setting up a Template.
G966 Provisioning Guide Page 15 © NEC Nederland B.V. 2015
When in a call, the M166 is always in Loud speaking mode. Here you can select the
Loud speaker volume.

Emergency Call Interrupt Mode.
The Emergency Call Interrupt mode, allows room monitoring when an alarm is active
on the M166. So, when an alarm is active and you want to listen in into the room,
you can call the M166. When the ECI mode is activated, the M166 will not ring, but it
will auto answer the call silently. You can select whether you want to have the
Vibrator on or off,
So, basically, it is a Profile setting that overrides the normal M166 settings
(temporarily). So it is used to override the normal settings temporarily, in case of
emergency.
The following settings are available.
1. Disabled.
2. Vibrate On,
3. Vibrate off
If alarm button was not pressed, incoming call is processed with normal ring sound
and vibrator settings.

Silent Charging
There are three options:
-
Disabled
The M166 remains fully operational when in charger.
- Silent
The M166 remains fully operational in charger, however, it will not ring.
- Disconnect.
The M166 will detach from the system, and will report itself absent. The M166 is
not reachable anymore.

Power off Button Time out
The time to keep the power button depressed to power off the M166.
Please note that the selection options are 5, 10, 15 seconds. In real life, the time can
be a few seconds longer.

Headset Mode
Two options: “Speaker disabled” or “Speaker enabled”.
This is self-explaining