English
- 3
This product can only be serviced in the country where it was purchased.
CAUTION
When connecting the power cord to the
product’s AC IN terminal, make sure the
connector is fully and firmly inserted.
Do not damage the power cord. Do not put
heavy objects on it, place it near heaters, pull
it with excessive strength, or apply a strong
force on it while it is bent.
A damaged power cord may cause a fire or an
electrical shock.
Do not install the product in narrow places
where heat tends to build up.
Do not use the product in an environment
with low heat dissipation.
Otherwise, it may cause a malfunction.
The RJ-45 port of the product is for use
with the product only. Do not connect it to a
network. Connecting this port to a network
that may receive over-voltage current may
cause damage to the product or an electrical
shock.
Do not use the product in a vehicle or another
means of transportation.
Do not place the product under direct sunlight
or near heaters.
This product is designed to be used indoors.
Do not use it outdoors. Otherwise, it may
cause a malfunction.
Do not use or store the product in the
following places.
• Near heaters
• Places with lots of humidity or dust, or
places subject to oily smoke
• Places where water or oil may splash
• Places with lots of corrosive gases, such as
near hot springs
• Places where the product may freeze
• Do not place the product on its side, face
down, or upside down.
• Places with lots of vibrations
If you will not be using the product for a long
time, disconnect it from the power distributor
for safety purposes.
Disconnect the power supply when
performing the maintenance.
Install the product in accordance with the
local laws and regulations.
Use ESD gloves when handling Pixel cards
to prevent static electricity from the human
body and contamination due to finger oils,
perspiration salts, flaking skin, and/or other
forms of human excretory secretions. The
LED modules and their electrical components
are sensitive to biological agents and
exposure to such risks degradation of
materials and performance.
Eliminate any static electricity from your body
before touching the Pixel cards by touching
an aluminum sash, a door knob, or some
other metal object.
